Palmyra Pro Plumbing Services
Leak detection

Leak detection in Palmyra that finds the source fast

Leak detection in Palmyra is the process of finding hidden water leaks without tearing your home apart. If you have a spike in your water bill, a damp spot on the floor, or the sound of running water when everything is off, we can help. Our technicians use cameras and acoustic equipment to locate the leak, then repair it the same day whenever possible.

Service overview

What leak detection in Palmyra actually involves

Leak detection in Palmyra is a diagnostic service that locates hidden water leaks in your plumbing system using non-invasive tools. We start by shutting off every fixture and checking your water meter for movement, which tells us whether the leak is on the supply side or the drain side. From there we use acoustic listening equipment, thermal imaging, and a leak detection camera to narrow down the exact spot. That means we can open one small section of wall or floor instead of guessing and tearing out more than necessary. Palmyra homes deal with a specific set of leak risks. Older houses near the downtown corridor often have copper pipe that has corroded from the inside out, while newer builds on slab foundations are prone to slab leaks that never show a drop above the floor. Frozen pipes are a real threat after a hard Lebanon County cold snap, and root intrusion in sewer lines can masquerade as a drain problem when the real issue is a cracked pipe underground. We see all of these regularly, and we know how to find the leak without turning your home upside down.

! Common warning signs

Water bill jumped without a change in usage

A hidden leak can waste 20 to 50 gallons a day, and the damage behind a wall or under a slab grows every week. By the time you see a stain, the repair is often three times the cost of finding it early.

Warm spot on the floor or a damp carpet

A warm spot on a slab floor usually means a hot-water line is leaking under the concrete. Left alone, it erodes the soil under the slab and can crack the foundation, which turns a pipe repair into a major structural job.

Sound of running water when everything is off

That sound is often a running toilet or a leaking supply line. A running toilet alone can waste 200 gallons a day, and a supply leak behind a wall can soak insulation and drywall before you see a stain.

Scope of work

What our leak detection service includes

Every leak detection visit includes a full diagnostic inspection and a written summary of what we found. Repairs are quoted separately so you can decide before we start. Here is what is covered.

  • 01

    Full system pressure test

    We shut off every fixture and test the supply lines with a pressure gauge to confirm which section is losing pressure. This step tells us whether the leak is on the hot side, cold side, or a drain line, and it takes about 20 minutes.

  • 02

    Acoustic and thermal inspection

    We use acoustic listening equipment to hear the leak through walls and floors, and thermal imaging to spot temperature differences where water is pooling. Both tools are non-invasive, so we do not open anything until we have a confirmed location.

  • 03

    Camera inspection for drains

    If the leak is on a drain line, we run a sewer camera through the pipe to check for root intrusion, cracked pipe, or a failed joint. You see the footage on the monitor, and we explain what it means before we recommend a repair.

  • 04

    Written findings and repair quote

    After the inspection, we give you a written summary of the leak location, the cause, and the recommended repair, along with a clear price. You decide whether to proceed. There is no obligation to book the repair the same day.

Why finding the leak early pays off

A hidden leak wastes water, raises your bill, and quietly damages framing, insulation, and flooring. The sooner we locate it, the smaller the repair and the lower the cost.

Book an inspection

Tools and methods we use to find leaks

Acoustic leak detector

Amplifies the sound of water escaping a pipe so we can hear the leak through walls, floors, and concrete without opening anything.

Thermal imaging camera

Shows temperature differences on walls and floors, which helps us spot a hot-water slab leak or a damp spot behind drywall.

Sewer camera (RIDGID)

Runs through drain lines to show root intrusion, cracked pipe, or a failed joint on a monitor so you can see the problem.

Pressure test gauge

Confirms which section of the supply system is losing pressure, so we know whether the leak is on the hot side, cold side, or a drain line.

Local execution

Palmyra sits in Lebanon County, where winters regularly drop below freezing and older homes near Downtown Palmyra still have original copper pipe. That combination means frozen pipes and pinhole leaks are common from December through March. We see a spike in burst pipe calls after the first hard freeze each year, and we keep copper pipe, PEX tubing, and a soldering torch on every truck so we can repair the line the same day. Newer homes on slab foundations in the Annville area are more likely to develop a slab leak, which never shows a drop above the floor. We use thermal imaging and pressure testing to confirm the location before we cut concrete, so you are not opening a whole floor to find one leak. We follow the Uniform Plumbing Code on every repair, and we pull permits when the job requires it. If you are searching for leak detection near me in Palmyra, we are local and we can usually be there within 24 to 48 hours.

How leak detection runs in Palmyra

  • • Downtown Palmyra
  • • Annville
  • • Palmyra Borough
  • • Northside Palmyra

Recent work

Slab leak found under a basement floor [ A homeowner in Annville noticed a warm spot on the basement floor and a water bill that was $70 higher than usual. Two other companies had quoted a full floor replacement without confirming the leak location. ]
Pinhole leak behind a kitchen wall [ We tested the meter, isolated the supply lines, and used acoustic equipment to find a pinhole leak in a copper pipe behind the wall. We opened one 12-inch section, replaced the corroded pipe with PEX, and pressure-tested the line. The stain stopped spreading and the water bill dropped by $40 the next month. ]
Forensic investigators in white suits and masks examining a crime scene outside a residential area.
Response time
Response time

Same-day leak detection when you need it

We answer when a leak will not wait

A burst pipe or a slab leak does not wait for a convenient time. We keep our schedule open for same-day leak calls in Palmyra and Annville, and we answer the phone at (717) 821-0000 during business hours. Most scheduled leak inspections happen within 24 to 48 hours, and emergency calls are prioritized. Our trucks carry copper pipe, PEX tubing, fittings, solder, a press tool, and a leak detection camera, so we can find and repair most leaks in one visit. If we need a part we do not carry, we tell you the same day and schedule the return trip. We do not leave a leaking pipe open overnight if we can help it.

24-48h
Typical inspection window

How our leak detection process works

1

Phone consultation

You call us at (717) 821-0000 and describe what you are seeing: a higher water bill, a damp spot, a sound of running water, or low water pressure. We ask a few questions to narrow down the likely cause and schedule a visit, usually within 24 to 48 hours.

2

Meter and pressure test

Our technician shuts off every fixture and watches your water meter. If the dial moves, the leak is on the pressurized supply side. We then isolate sections of the system with shutoff valves and use a pressure gauge to confirm which line is losing pressure. This step takes 20 to 30 minutes.

3

Acoustic and camera inspection

We use a leak detection camera and acoustic listening equipment to hear and see the leak through walls, floors, and concrete. For drain leaks, we run a sewer camera through the line to check for root intrusion or a cracked pipe. Thermal imaging helps us spot temperature differences where water is pooling behind a wall.

Frequently asked questions

How much does leak detection in Palmyra cost?

Most leak inspections in Palmyra run $180 to $450 in 2026, depending on how many lines we need to test and whether the leak is under a slab. The price includes the meter test, acoustic inspection, and camera work. If we repair the leak the same day, the repair is priced separately and quoted before we start. Call (717) 821-0000 for a specific quote.

How long does a leak detection visit take?

A typical leak detection visit takes two to four hours. Simple supply-line leaks under a sink or behind a wall can be found in under an hour. Slab leaks and underground line leaks take longer because we use pressure testing and thermal imaging to confirm the location before we cut concrete. We tell you the expected time when we schedule.

Can you find a leak without tearing up my floor?

Yes. We use acoustic listening equipment, thermal imaging, and a leak detection camera to locate the leak through the floor or wall. We mark the spot and confirm it with a second method before we open anything. In most cases, we open one small section rather than tearing up an entire room.

What are the signs I need leak detection in Palmyra?

The most common signs are a water bill that jumps 20 percent or more without a change in usage, a damp spot on the floor or ceiling, the sound of running water when every fixture is off, low water pressure, or a warm spot on a slab floor. A running toilet or a leaking water heater also counts. If you notice any of these, call us before the damage spreads.

!

Schedule leak detection in Palmyra today

A hidden leak gets worse every day. We find the source with cameras and acoustic equipment, confirm it before we open anything, and repair it the same day when possible. Call (717) 821-0000 or book online.

Call Now: (717) 821-0000